Description | Spatial | Attributes |
The Well Activity Report dataset tracks samples and drilling information while there is activity on a well. These samples are mapped along the boreholes using raw and pseudo directional survey data.
To represent the locations of well activity samples.
publication date
Data use is limited to subscribers of GOM-Cubed
Internal feature number.Definition Source:
ESRI
Feature geometry.Definition Source:
ESRI
API_WELL_NUMBER - A unique well identification number consisting of (from left to right) a two digit state code (or pseudo for Offshore), a three digit county code (or pseudo for Offshore), a five digit unique well code, and if applicable, a two digit sidetrack code as defined in API Bulletin D12A.Definition Source:
http://www.data.boem.gov/homepg/data_center/plans/apdcombined/APDForm(Access)dfn.asp
WELL_NAME - The name assigned to the well. It may be a special name or the name of the property to which the well belongs.Definition Source:
http://www.data.boem.gov/homepg/data_center/plans/apdcombined/APDForm(Access)dfn.asp
A 2 digit numerical suffix to the well number that identifies the number of times that a specific segment of a wellbore has been re-drilled to the same geologic objective + A 2 digit numerical suffix to the well number that identifies the number of times a well has been drilled to a new geologic objective.Definition Source:
http://www.data.boem.gov/homepg/data_center/plans/apdcombined/APDForm(Access)dfn.asp
Measured Depth on Weekly Activity ReportDefinition Source:
http://www.data.boem.gov/homepg/data_center/plans/apdcombined/APDForm(Access)dfn.asp
True Measured Depth on Weekly Activity ReportDefinition Source:
http://www.data.boem.gov/homepg/data_center/plans/apdcombined/APDForm(Access)dfn.asp
Fluid mud weight pounds per gallon (ppg) in Weekly Activity ReportDefinition Source:
BOEM
Geochem Samples on Weekly Activity ReportDefinition Source:
BOEM
Litho Samples on Weekly Activity ReportDefinition Source:
BOEM
Paleo Samples on Weekly Activity ReportDefinition Source:
BOEM
Sidewall Samples on Weekly Activity ReportDefinition Source:
BOEM
Conventional Cores on Weekly Activity ReportDefinition Source:
BOEM
Velocity samples on Weekly Activity ReportDefinition Source:
BOEM
Concatenation of API+DrillMD+DrillTVD+Fluid Weight+Sample FlagsDefinition Source:
ESA-derived from Production Table
True vertical depth (TVD) calculated from raw directional survey dataDefinition Source:
ESA-derived
LATITUDE - The latitude value of a location […]. A positive value denotes north. […].Definition Source:
BOEM
LONGITUDE - The longitude value of a location […]. A positive value denotes east. Angle measured about the spheroid axis from a local prime meridian to the meridian through the point.Definition Source:
BOEM
Last Weekly Report DateDefinition Source:
BOEM
BUS_ASC_NAME - The name of a **business associate**.Definition Source:
BOEM
The business associate person designated as the representative for doing business with the Minerals Management Service.Definition Source:
BOEM
The telephone number associated with a particular contactDefinition Source:
BOEM
The name of the drilling rig, assigned by the drilling contractor.Definition Source:
BOEM
The depth of the water at a well/platform location from the water level to the mud line.Definition Source:
BOEM
The distance from the rig's Kelly bushing to mean sea level.Definition Source:
BOEM
The number assigned to a lease by the regulatory agency having jurisdiction over mineral activity in the territory where the lease is located.Definition Source:
BOEM
The number assigned to the lease that contains the bottom location of a well.Definition Source:
BOEM
Surface Lease Number + Surface Area Name + Block Number on Well Activity Report.Definition Source:
http://www.gomsmart.com/GOMsmartHelp/Data/boreholes.htm
Well Bottom Area + Block Number on the Well Activity Report.Definition Source:
http://www.gomsmart.com/GOMsmartHelp/Data/boreholes.htm
The date the last test of the blowout preventer (BOP) stack was performed.Definition Source:
BOEM
Maximum of RAM_TST_PRSS -The pressure measured during the test of the ram blowout preventer, expressed in pounds per square inch.Definition Source:
BOEM
Maximum of ANNULAR_TST_PRSS -The pressure (expressed in square pounds per inch) measured during the test of the annular blowout preventer.Definition Source:
BOEM